Electronic Over Current Relay
EOCR-2CT

 

Protection

Protective Item	Trip Time	Description
Over-current	O-TIME	Is
Phase Loss	3 sec	-
Locked Rotor	0.5sec after elapse of dt	2times OC setting value

Specification

Current Setting Range	Current	05	0.5 ~ 6A
		30	3.0 ~ 30A
		60	10 ~ 60A
	Starting delay time	D-TIME	OFF
	Trip time	O-TIME	0.5, 1~10 sec
Operating t-c characteristic		Over-Current	Definite
Tolerance		Current	±5%
		TIME	±5%
Environment	Temperature	Operation	-20 ~60℃
		Store	-30 ~80℃
	Humidity		30~85% RH Non-condensing
Control Power			220 : 220VAC±15%, 50/60Hz
			110 : 110VAC ±15%, 50/60Hz
Output relay		2-SPST	3A / 250VAC Resistive
Insulation	Between casing and circuit		Over 10MΩ, 500VDC
Dielectric Strength	Between casing and circuit		2000VAC 60Hz, 1min
	Between open contacts		1000VAC 60Hz, 1min
	between circuit		2000VAC 60Hz, 1min
Reset			Manual/Electrical
Installation			35mm DIN-Rail or Panel Mounting

EOCR-SSD05 EOCR-SSD30